LS810 Aviation Obstruction Light 

Obstruction light for a wide variety of cranes used in Harbors, Metallurgies, Towers (Telecom,
GSM), Smokestacks, Buildings and any other potentially hazardous obstructions to air traffic with a steady burning red safety light.

Specifications

Description Parameter
Standard Compliant to the ICAO(Aerodromes Annex 14) and FAA-L810
Light source LED
Vertical degree ?10°
Horizontal degree 360°
LED color Aviation red(Other color can be customized)
Flashing rate Steady burning or flashing(flashing rate can be selected)
Operating voltage AC110V~AC240V/DC24-DC48
LED life ?100,000h
Power consumption 4W
On/off level 500Lux
Intensity ?32.5cd
Operating temperature -40°C ~ +55°C
IP Protection IP66
Relative humidity 10% ~ 95% (no condensing)
Weight 300g
Material Base:Die casting aluminumHousing: PC

Functions & Features

  • Use Fresnel lens, high utilization of light, valid keeping light beam in the scope as required.
  • Based on LED technology, low power consumption, and high efficiency.
  • Die casting aluminum enclosure with powder-coat paint finishes, providing corrosionresistance and durability.
  • G3/4”pipe is available, ease of mount.
  • EMC Compliance, No RF Radiation.
  • Self-contained compartment, with stainless steel wire which is used to secure the unit against falling in operation, and ease of mount.
  • Built-in photocell can switch ON/OFF the light at dawn and dusk (optional).
  • Steady burning or flashing type (no need external controller).
  • Extremely Reliable – Major Maintenance Cost Saving.
  • External two M20X1.5 Waterproof gland(can be customized).

Installation and operation

  • Check whether the supply voltage does comply with the rated voltage of the lamp.
  • Insert the power cable through the bottom of lamp holder, and connect them to the terminals in the base respectively.
  • Follow connection diagram and set up work model. (remark: dial switch ON---1, figure---0).
  • Tighten the screws between lamp housing and base.
  • Screw the lamp on the mounting bracket, which should be fixed on a smooth surface with enough mechanical strength. Or you can select our mounting bracket: PJ024, PJ028 and PJ030 (installing diagram), special bracket can be customized.
  • Switch on the power, and then the light works.

Mounting dimension?unit: mm?& Wiring Connection

Product File

  • Model: LS810
  • Applications:Obstruction light for a wide variety of cranes used in Harbors, Metallurgies, Towers (Telecom,GSM), Smokestacks, Buildings and any other potentially hazardous obstructions to air traffic with a steady burning red safety light..
  • Standard:Compliant to the ICAO(Aerodromes Annex 14) and FAA-L810
  • Certificate:
  • Improve Record:None
  • Fault Record:None
  • Quantity/Delivery Day:

Quick Inquiry



Certification


ls810,icao certuficate

Amount pcs
Remark     
About Nanhua | Contact Us | Careers
© 2009 Nanhua Electronics Company - All Rights Reserved.