AE310 Outdoor siren 

Designed for the operation warning or auxiliary alarming for the hoist machinery, construction machinery, pavement construction machinery and port machinery. Also applied for the facilities of mine, metallurgy, chemical industries, marine or vessels, etc.

Specifications

Description Parameter
Operating voltage AC36V/AC110V/AC220V/AC380V±10%/ DC24V±20%(customized)
Power consumption 20W
Tone Model 1:A/B/E/D/whistle(optional) remote switchover
- Model 2: 16 kinds of tones(See tone table) dial switch
Decibel  104~116dB
Color Red(body)+Black(Speaker)
Warning mode Sound signal
Operating temperature -30˚C ~ +70˚C
Humidity 10% ~ 95% (non coagulation)
IP rate IP65
Material Aluminum 
Weight 2Kg

Functions & Features

  • Aluminium body, impact structure, light weight and excellent corrosion resistance.
  • Good seal capacity features the superb waterproof and dustproof performance.
  • Wall-mounted or plane-mounted to meet various installation requirements and high vibration resistance.
  • Employ the industrial grade digital and audio chip to guarantee the high stability and EMI.
  • Model One:Optionally use wiring harness to remotelly switch the tones, at most switch 5 tones with its corresponding working state.
    Model Two:use internal dial switch to set up the tone (16 kinds)

Mounting Dimension(Unit:mm)

Model Selection

Model Tone(Mode 1) Tone(Mode 2) Installation Volume adjustability
AE310U 5 kinds(Remote control ) 16 kinds (dial switch) Wall-mounted Yes
AE310P 5 kinds(Remote control ) 16 kinds (dial switch) Plane-mounted Yes

Wiring diagram

Model 1(Picture A)

Model 1(Picture B)

Model 2

Installation

  • Please make sure the logo side shall be right above, and then fix it onto the mounting surface which should have enough smoothness and mechanical strengthen with 4*M6 screws.
  • The angle between speaker and horizontal plane should be less than 90°. To protect the sound from the water accumulation in the speaker.
  • Tone model 1: Connect the power cable and control cable through the cable connector. Refer to the wiring diagram.
    of model 1 and remarks on the cable to make the connection and be ensure the input power is same as the working voltage of the siren.
  • Tone model 2: Take off the front cover. Based on the below picture 1 and wiring diagram of model 2 (picture A), make the AC power voltage connection to the terminals. Based on the below picture 1 and wiring diagram of model 2 (picture B), make the AC power voltage connection to the terminals. There are 4 nos dial switches on the PCB board. Refer to the tone selection table to choice the tone. Be ensure the power voltage is same as the working voltage.
  • Refer to below picture 2 to switch over the tone. After selecting model 1, power it on and the indicator light on PCB is flashing. After selecting model 2, indicator light is steady on.

Product Components

Tone Selection table

Code Tone Code Tone
0000 A 1000 Bell(Ding dang)
0001 B 1001 Marine fire alarm
0010 E 1010 Ring
0011 D 1011 Europe alarm
0100 Y 1100 Marine alarm
0101 Whistle 1101 Air alert
0110 Engineering Tone 1110 Radar alert
0111 7 short 1 long 1111 Welcoming sound

Decibel and Tone Corresponding Curve

Decibel and Distance Corresponding Curve

Maintenance

  • When choose the remote tone switchover, please switch the dial switch to “left side”. Power it on, the red indicator shall be flashing. If the indicator no action, please check the power voltage is normal. If the light is steady on, it means the switchover does not work, please turn the switch to exact position. If the light is flashing but no sound, please check the control cable.
  • When choose the dial switch to select the tone, please switch the dial switch to “right side”. And then power it on, the siren will give out the corresponding tone and the indicator is steady on. If there is no sound and indictor is no action, please check the power supply voltage. If the indicator is steady on but no sound, it indicates a failure arises, please stop using.
  • Volume can be adjusted at any time. When the volume adjustor fails, the volume will be in maximum.
  • Please clear the speaker and body at fixed period to avoid any obstacle of the sound.

Product File

  • Model: AE310
  • Applications: Designed for the operation warning or auxiliary alarming for the hoist machinery, construction machinery, pavement construction machinery and port machinery. Also applied for the facilities of mine, metallurgy, chemical industries, marine or vessels, etc
  • Standard:
  • Certificate:
    1. Utility model patent certificate
    2. CE certificate
  • Improve Records:
  • Fault Records:
  • Quantity/Delivery Day:


Certification


Amount unit
Remark     
About Nanhua | Contact Us | Careers
© 2009 Nanhua Electronics Company - All Rights Reserved.